CREATOR WORKFLOW
How to control glare in a tabletop product demo
Record a short lighting test to keep printed details readable as a glossy product turns on camera.
By Colquhoun Studio editorial
Decide which detail must stay visible
Choose the part the camera has to show: a measuring line, a printed ingredient, or a button on a glossy panel. Wipe away obvious fingerprints if appropriate, set the product on a stable surface, and frame the shot as you plan to record it. Roll a few seconds while turning the product through the real motion. The reflection that matters is the one that hides a needed detail, not every reflection on the object.
Move one thing at a time
Leave the camera and product where they are and move the light a little to one side or a little higher. Repeat the same product movement. If the bright patch moves away from the label, keep that light position and compare another test. If the room itself is reflected, turn off or block a competing light source, or change the camera angle slightly. With multiple changes at once, it is hard to tell which one solved it.
Soften a pinpoint highlight
If moving the light only shifts a small, harsh reflection around the surface, try a larger diffused light source, such as a softbox designed for your light. A diffuser changes the shape of a reflection; it does not make a shiny object stop reflecting. Adobe’s product photography guide discusses diffused light for readable labels and testing lighting angles. The same approach is a useful starting point for a tabletop video: https://www.adobe.com/creativecloud/photography/discover/product-photography.html
Check the whole motion on playback
Play the recorded clip rather than judging a paused preview. In a glass-bottle demo, the front label might be clear at the start but wash out halfway through the turn. If only a short part of the motion causes trouble, adjust the movement or film a separate label close-up. Avoid simply darkening the whole frame if it also makes the details harder to read.
Save the setup for the next take
Once the label stays readable, take a reference picture of the light, camera, and product positions. Record which way the product turns and which detail you checked. When moving to the next item, replay the test with that item: a flatter package or a different finish can reflect the same setup in a new place.