CREATOR WORKFLOW

How to keep a tabletop demo in focus when your hands move

Test a focus point before recording, then keep hands and products within the area your camera can show clearly.

By Colquhoun Studio editorial ·

Find out what your camera is following

Record a short test with the product framed as it will be in the demo. Move a hand into the shot and perform the most important action. Watch the recorded clip. If a printed mark goes soft every time the hand enters and sharpens after it leaves, autofocus may be switching subjects. Check that the camera is stable before blaming focus.

Choose the exact detail that must be sharp

Pick the part the viewer needs to see, such as the line on a dial, rather than focusing on the front edge of the table. Put the product where the action happens and focus there. If the product comes off its mark mid-shot, practice the real movement. A focus point that works for a still frame does not prove the whole move will stay sharp.

Test a focus lock for a fixed setup

If your camera or app offers a way to lock focus, try it on a shot where the camera and product stay about the same distance apart. Apple, for example, documents focus and exposure lock in Camera Control on supported iPhone models. Controls and lock behavior vary, and some options lock exposure too. Repeat the hand movement and check both sharpness and brightness in the recording. Reference: https://support.apple.com/guide/iphone/use-the-camera-control-iph0c397b154/ios

Change the staging if the product must move

A focus lock holds a distance; it cannot keep a product sharp if it moves far enough toward or away from the lens. Place a removable mark on the table and try moving the product across the frame rather than toward the camera. If the viewer needs a close-up, film that as a separate shot and set focus for that distance. If you keep autofocus, compare a real test rather than assuming tracking will follow the part you want.

Inspect the export at the moment that matters

Zoom in on the label, dial, or connection in the actual recording, then review it at normal size. Check the first contact, the hardest moment in the middle, and the result. If the important detail still disappears, reshoot that action before editing around the blur. Keep a note of the camera position, product mark, and focus setting for any pickup shot.